RV Product Overview

It's the little things that really can make your life easier, and this is one of them. This simple innovation creates a quick and easy way to store your water hoses that eliminates kinking and twisting of the hose and also provides for an easy way to drain the hose before storing it away.

The Problem

The problem is that even the best hoses will kink and twist over time from the constant use of coiling and uncoiling them and attempting to prevent eventual kinking by twisting to keep the coil even and laying flat. Usually the real problem occurs when uncoiling as a twist will happen when the hose is pulled from the coil. If this happens over and over in the same place on the hose, eventually it will cause a weak spot on the hose which will kink at every use.

Another problem is that it is difficult to drain the hose of all of the water left in the hose after use without blowing on it in attempting to force the excess water out of the opposite end or attempting to drain it by lowering (or raising) one end. This is a difficult task when attempting it on a 50 foot hose.

The Solution

The solution to all of the above issues is this unique Coil n' Wrap coiling system for water hoses. This simple system fits 1/2" and 5/8" hoses and is composed of only two parts: a two holed rubber device called a "Coil-It" used to coil the hose and a "Velcro One-Wrap" strap used to secure the coiled hose. Additionally, when coiling the hose by use of this ingenious system, the hose will completely drain of all water left in the hose during this process without any additional effort.

Upon completion of the coiling and securing the hose with the attached velcro strap, the hose can then be conveniently stored for future use and simply uncoiled, by reversing the process. By use of this system, kinks and twists will be eliminated thus the lifetime of the hose will be extended greatly.

Installation and Operation

The process of installation consists of installing the velcro strap permanently at or near the female end of the hose. The Coil-It rubber device is also permanently attached and installed over the male end of the hose and is slid about 2 to 3 feet down the hose. The hose is then held in one hand and one coil is made then the male end is fit into the other hole of the Coil-It device. The hose is then rolled with a hand under motion creating smooth coils and at the same time draining all residual water from the hose. When the end of the hose is reached by the female end, the velcro strap is then wrapped around the hose securing it together. The male and female ends can be joined together at this point and the hose is ready for neat and convenient storage. To use the hose, the process is simply reversed and the Coil-It parts remain in place for future easy coiling.

Company Website: Coil n' Wrap RV Accessories

Back To: RV Parts & Accessories Reviews